Josh-the-Locksmith
25 Years Experience
Austin, TX
Male, 46
I've been a locksmith since 1998. I did automotive residential & commercial work from 1998 to 2008. From 2008 to 2018, I did some residential, but mostly commercial work. I have been project managing & estimating since 2018. I used to locksmith in the Chicago area, now the Austin area.
The only plastic ring that comes to mind is on the Schlage deadbolts. It allows the deadbolt to hold snug in the door while you put the mounting screws in. You can remove it and the metal ring as well if need be. There should be 2 screws on the inside of the keyed side. 1 holds the cylinder in place, the other holds the plastic & metal ring on.
If I'm totally off, send me a photo on my Twitter account: @ATXJoshL
Share Answer: 
Anywhere from $150 to $350. Hard to say. it varies so much depending on city, area, & locksmith.
Share Answer: 
Not really. The only way to save some money would be to take the door lock out & take the whole car to a lock shop so they don't have to come to you, but that's just not practical. I'd just call around & get price quotes. Even ask the dealer. Then ask the technician again for the price before they get started once on site. Nobody likes suprises.
Share Answer: 
The inside knob should have a set screw that takes a flat head screwdriver. Unscrew it, & the whole knob should get loose & unscrew counterclockwise. Then the spindle should slide out the front. If it's a 2-piece spindle, there will be 2 halves. 1 will slide straight out & the other you will lift in 1 direction or the other to unhook it from the lock.
Share Answer: 
Federal Lobbyist
What was the strangest lobbying request you've ever received?
Air Traffic Controller
Have you ever ordered a pilot to abort mid-takeoff?
Casino Dealer
Do you find casinos to be depressing places to work?
Well from the way you make it sound, both sides are already locked, and people are just climbing over the fence? I think if these people are going to go to those lengths to get past the fence, it won't matter what lock you put on. Perhaps barbed wire? Snipers? Electric fence? Honestly, I don't know if there is a reasonable solution for fence hoppers. Security cameras and prosecution might work! If you're asking for a solution to allow tenants access through the lock, you could get a double-sided combination lock. Simplex makes one that holds up decently well. It's the EE1000 series.
Share Answer: 
Sorry for the late response, this question slipped through the cracks. By blank vintage key, do you mean skeleton key? I'm not quite sure what you mean, but your best bet for anything vintage would be to find a lock shop that has been around a LONG time. They usually have old blanks, & are familiar with anything you'd consider vintage.
Share Answer: 
There might be a code stamped on the ignition. I haven't made a key to a Harley in years, & when I did I didn't use the code.
Share Answer: 
-OR-
Login with Facebook (max 20 characters - letters, numbers, and underscores only. Note that your username is private, and you have the option to choose an alias when asking questions or hosting a Q&A.)
(A valid e-mail address is required. Your e-mail will not be shared with anyone.)
(min 5 characters)
By checking this box, you acknowledge that you have read and agree to Jobstr.com’s Terms and Privacy Policy.
-OR-
Register with Facebook(Don't worry: you'll be able to choose an alias when asking questions or hosting a Q&A.)
Browse Jobs
Host a Q&A
Search
Submit Your Question
Host a Q&A
Last 7
