Factor
Woodstock, VA
Male, 65
My life in ATC began with 4 years Air Force then another 30 years with the Federal Aviation Admin. working tower & radar at some big international airports. I fought in the 1981 war with PATCO, survived the strike and kept a job that was just too exhilarating to walk away from. While there was nothing better than working airplanes, I did move on through several air traffic supervisory and management positions. It was a long, crazy career but I wouldn't trade a moment of it for love or lucre!
Greetings CollegeGirl! I am happy to see a continuing interest in the ATC profession.
The situation you describe is going to make it difficult for you to land an ATC position with the Federal Aviation Administration unless you can somehow get two to four years of college with an aviation related degree. Other options include gaining ATC experience in the military, which was my pathway in. Or perhaps you might apply for employment with one of the private ATC providers. You should also consider flight training while you are in college. Having your pilot’s license will help you meet the threshold for aviation related experience.
Best of luck and thanks for writing!
Factor
Share Answer: 
Good hearing from you Aaron. The gear-up landing at Newark was pretty dramatic. Whenever airplane bellies rub runways; sparks will fly! Your question is a good one because videos like the Newark landing show up in the news periodically, yet it’s hard to understand exactly what’s going on. People watch and wonder if a pilot can actually train for such a thing, how does it happen, what are the risks, etc.
First off; pilots obviously never make gear-up landings for practice. That would be kinda like practicing shooting yourself in the foot. The best way to rehearse for such an event is to practice landing WITH the landing gear extended. The trick will be in how the plane approaches the runway, which is going to be pretty much the same as a normal landing. The airplane will be slowed to the normal landing speed, with the nose pointed straight down the runway. Once over the runway, the pilot will ‘flare’ the aircraft; raising the nose to bleed off more speed as the plane descends those final few feet to the surface. Once on the runway, the pilot can use the aircraft’s rudder to try keeping the plane on the runway centerline.
How gear-up landings occur can vary. The most obvious reason is a mechanical malfunction. There is another, fairly common, reason. My flight instructor once told me that there are two kinds of pilots; those who’ve forgotten to put the gear down before landing and those who WILL forget! It’s not quite that extreme but sometimes pilots, especially pilots with low experience levels, can overlook that one important detail in an otherwise perfect landing. If there is an operational control tower at the airport; an alert controller may notice and have the pilot pull up before it’s too late. If the field is uncontrolled, the pilot may not be so lucky!
Risks associated with these landings are pretty much what you’d expect; lots of damage to the plane, a possibility of fire, personal injury and maybe even damage to the runway and associated lighting. No matter what happens – it’s never good and I do not recommend it!
Thanks for writing!
Factor
Share Answer: 
Hello again and thanks for your questions! The subject of employment prospects may bring different responses, depending on who you ask. Controllers, especially those working in the busiest ATC facilities, will likely say they need more help. I worked in very busy places where the normal “minimum” staffing levels could quickly turn into “critical” staffing levels due to vacation schedules, sick leave and controllers on special details to administrative tasks. Throw in some bad weather, unusually high traffic demand or unplanned equipment outages and you’d end up with a bunch of drained and disgruntled people by shift’s end. Had you asked me your first question at the end of such a shift; I’d have said we needed more controllers, as soon as possible!
Management’s view varied; depending on how far they were from the epicenter of discontent. Shift supervisors generally felt the same heat as their controllers during a busy, understaffed shift. They’d usually agree we needed more help. The front office’s response was to point out that perhaps too much leave was approved or that not enough overtime was called in. The regional office, far from the immediacy of a hectic, understaffed shift, would only see the facility’s authorized staffing levels, performance figures (traffic count figures) and other numbers that belied the challenges associated with them.
FAA should also be mindful of the attrition rate of controllers due to retirement. Succession planning is an important factor in current and future staffing levels. Then, of course, somewhere far above our level, there are congressional committees working with the FAA on its annual budget request. Those folks are about as far from a controller’s daily reality as you can get. It’s like a crazy analogy where the leaves in the treetops place limits on how big the roots grow.
We should also keep in mind that the FAA is always seeking new technology that might automate certain controller functions, thus decreasing their recruitment needs.
Was my career worth it? Even with the occasionally unpleasant variables, I’d have to say emphatically; yes! I always considered myself lucky to have the best job there was. Like sky diving, sports car racing or skating on thin ice; it was a thrill - as long as nothing went wrong.
Sorry I had to give such convoluted answers to your “two simple questions.” Sometimes I drink too much coffee in the morning.
Cheers,
Factor
Share Answer: 
Hello “No. 1 Uncle,” and a happy 4th back at you! I hope you enjoyed a fabulous fireworks display.
In order to obtain a permit for public fireworks displays, the organizers must obtain approval from the Federal Aviation Administration. Any conditions the FAA imposes must be followed in order to receive that permit. The FAA then makes the information on such events available to those who need to know.
I can’t say there have never been aircraft accidents due to fireworks displays. Using absolutes like “always” or “never” tend to get me into trouble. I’ll just say I don’t recall hearing of any and that makes sense to me. After all, aeronautical charts clearly indicate minimum safe altitudes (MSA) to fly at. Planes rarely operate below the MSA unless they are taking off or landing. It’s a pretty safe bet your FAA won’t approve fireworks displays near an airport, along those departure or arrival paths. Besides, fireworks don’t go much higher that a few hundred feet. Certain flights do operate at those altitudes but only during daylight hours; a bad time for fireworks. These planes are involved in such things as crop-dusting, banner towing, aerial photography or some other low altitude mission.
I hope this answers your question. Thanks for writing!
Factor
Share Answer: 
CrossFit Coach
Why is Crossfit so popular with women?
Investment Banker
How much can bankers earn in a year?
SWAT Team Commander (Retired)
How do you decide whether to try and kill a hostage taker?
Thanks for writing, JB. First off, I should mention that very few small airports have operating control towers. It is not cost effective to have controllers at airports with very little air traffic. Even if you see a tower there; chances are you’ll find far more cobwebs inside than controllers.
To your question though, I will break it down into a few important points. At airports without towers, most planes come and go as they please. They are responsible for separating themselves visually from other traffic. At such airports, the only pilots that need permission to take off are those who filed an Instrument Flight Plan with ATC. As there would be no controllers on site; permission is generally obtained from the ATC facility responsible for that airport, either by phone or radio. Pilots are issued a short time window in which to depart so that ATC knows when to expect them and provide ATC services.
At airports with operational towers, all flights must receive a specific clearance to take off and/or land. Without that ATC clearance; pilots can do neither.
There are also airports with part-time control towers. When the tower is open, the rules specified in the previous paragraph apply. When it is closed, expect what I outlined two paragraphs back. There are several publications available that list all towers and their operating hours, so you’ll know what to expect when you go flying.
You also asked if a tower is required to keep a schedule for take offs, even if they have say less than one a day. Although towers do not generally keep flight schedules, they do receive information on the proposed departure time of flights on Instrument Flight Plans. This information is normally transmitted to the tower via computer.
I hope this answers your questions!
Cheers,
Factor
Share Answer: 
That’s a very simple, straightforward question! So here I go with another long and convoluted answer. I know, I know. There’s that old adage that says to never give ‘em more information than they asked for. Generally good advice but I don’t think it applies here on Jobstr. If people are interested enough to write; they probably want a response that’ll actually help them understand the subject. And uhh, one day I hope to produce such a response! But for now; just read on and test your attention span.
First off; the optimum time on a control position is different than the time limit defined in FAA’s labor agreement with the controller’s union (National Air Traffic Controllers Association). I’m not sure whether that limit has changed since I left the FAA but it used to be two hours. The time limit for working a control position was established back in the 1970s because controllers were frequently being left bleeding to death on very busy positions with no relief in sight. By the time someone showed up to give them a break, they were beyond exhausted. Depending on conditions; even a 90 minute stint could shred your nerves like confetti. I’ll just say this lead to safety issues.
Defining the optimum time on position isn’t as easy as it sounds. “Optimum” is probably one of the original fifty shades of gray. I had one friend who would awake before dawn and drive 1,100 miles to visit his girlfriend in the Florida Keys. He’d stop only for gas or the men’s room. Sixteen hours at the wheel didn’t bother him at all. But me? Driving more than eight hours would probably get me into a news headline that began with the word “Tragic.” Another friend I worked with would become irritable if he was left on a busy sector for more than 60 minutes. In time, the best ATC Supervisors learned what the “optimum” time on position was for each of their controllers and tried to get them relieved before they burst into flames. We were all different; kind of like the contents of that ‘junk drawer’ in your kitchen. Don’t have a junk drawer? I’ll send you a starter kit.
As to the break time; that depended on factors like who you were working for (Captain Bligh or Captain Kangaroo), how busy the shift was or the individual controller’s work ethic. If a controller had taken a particularly brutal beating on a position; most Supervisors would allow them a little extra break time if they could. Some controllers would either refuse a break altogether or take a very short one if they knew their teammates needed them. Then there were the controllers who’d milk their break until an angry Supervisor came and chased them back to work. The optimum break time was always as subjective as the optimum amount of time on position.
Thanks for writing and for making it to the end of this response!
Cheers,
Factor
Share Answer: 
Greetings and thanks for writing. Although my opinion is worth a little more than a burned out matchstick; I’ll give it to you. I think you should contact the FAA Regional Office nearest you. A list of such offices can be found here:
http://www.faa.gov/about/office_org/headquarters_offices/arc/ro_center/
Ask to speak with someone who is directly involved in hiring controllers, Tell them of your situation and ask if they plan on hiring within your specific timeframe. Don’t be discouraged if they say they won’t be hiring. There are nine (9) FAA Regions and just because one of them has no upcoming vacancies doesn’t mean some or all of the other eight Regions won’t be hiring either. Give ‘em a call. When I was trying to get the job, my ‘home’ Region told me they were not currently hiring. They advised me to call another Regional Office (RO). I did - and that Region was indeed hiring. They also told me I’d have to have my application transferred from my ‘home’ RO to their office. Apparently at the time, you couldn’t have your name on more than one Region’s list of applicants. I don’t know if that is still the case or not but it’s a question to ask them.
If you run into a dead end with the FAA and are still determined to be a controller; contact one or all of the private companies who provide ATC services and ask if they’re hiring.
Best of luck to you!
Factor
Share Answer: 
-OR-
Login with Facebook (max 20 characters - letters, numbers, and underscores only. Note that your username is private, and you have the option to choose an alias when asking questions or hosting a Q&A.)
(A valid e-mail address is required. Your e-mail will not be shared with anyone.)
(min 5 characters)
By checking this box, you acknowledge that you have read and agree to Jobstr.com’s Terms and Privacy Policy.
-OR-
Register with Facebook(Don't worry: you'll be able to choose an alias when asking questions or hosting a Q&A.)
Browse Jobs
Host a Q&A
Search
Submit Your Question
Host a Q&A
Last 7
